ENDOSCOPY CAMERAS  

SOPRO 161 Digital Endoscopy Camera

High sensitivity 1/3” CCD
giving good pictures even in difficult lighting conditions, and allowing to improve the Signal / Noise ratio.

C-mount sensor
allowing to change the objective and adapt it easily to different applications.
- C-Mount, high quality F22 objective.
- Ergonomic focus ring.
- M-type endoscope adapter.

Free rotation, no damage of the protective cap.
- No fog.
thanks to the specific design of the instrument holder.

SOPRO 167 Digital Endoscopy Camera

Silicone medical grade cable:
no shape memory, easy to roll up, high resistance.
Remote Control with 2 buttons:

- Automatic White Balance,
-
Two peripherals triggering.

High sensivity 1/3’’ CCD
giving good pictures even in difficult lighting conditions. C-Mount, universal standard: allowing an easy change of the objective.
C-Mount, high quality F22 objective.
- Ergonomic focus ring.
-
M-type endoscope adapter.

Free rotation, no damage of the protective cap.
- No fog.
thanks to the specific design of the instrument holder.

SOPRO 367 3 CCD Digital Endoscopy Camera

Silicone medical grade cable:
no shape memory, easy to roll up, high resistance.
Remote Control with 2 buttons:
- Automatic white balance or zoom function*
- Two peripherals triggering.
Ultra small
camera head thanks to its 1/4” CCD and micro prism technology.
C-Mount, high quality F18 objective.
-
Ergonomic focus ring.
-
M-type endoscope adapter.

Free rotation no damage of the protective cap.
- No fog
thanks to the specific design of the instrument holder.

SOPRO 177 DIGITAL 1/6" CAMERA for flexible scopes

High sensitivity 1/6" CCD
giving good pictures even in low light conditions, and allowing to improve the Signal / Noise ratio.
High quality objective
providing an image without distorsion.
Diameter of the cable:
3+/- 0,2 mm Length of the cable: standard 3,65m, available: 5,50m. Camera head WATERPROOF
INSUFFLATEUR  

SOPRO 600 CO2 Insufflators for Laparoscopy

Safety
•Patient safety: when ON, the device performs an auto-test allowing to check the good functioning of the regulation system.

•The device performs automatically the needle test during the first seconds of insufflation.

•The regulation mode is not based on the flow but on the modulation of the insufflation pressure so that this one is always as low as possible.

•In case of overpressure maintained for more than 3 seconds, the device automatically desufflates.
Easiness
•The user starts the cession, then, once the body cavity is enough dilated (mode 1l/min), shifts to high flow position. That’s all!

Efficiency
•Pressure lowering in the cavity is very rapidly detected and immediately compensated by an optimal flow.
The Options which make the difference*
•The external desufflation option cancels the risk of a flow back in the device which is the main cause of return for Service. It can be driven thanks to a foot remote control to improve smokes clearing.

•The internal heating option avoids the risks of vasoconstriction and even of hypothermia.

•The Data Memory Inside option saves the malfunction of the device to ease the Service process.

•Available in 20, 30 and 45 l/min
LIGHT SOURCES  

SOPRO 210 100 Watts Xenon light source 

Easy access to the bulb:
•neither specific tool nor training is required, any technician can replace the bulb within 5 minutes once cooled down;

•high quality optical components;

•the Hot Mirror reflects InfraRed rays, reducing the temperature at the focusing point;

•the condensor focusses all the light in your light cable.
The Digital Display
shows the light intensity (0 to 100%) and the age of the bulb: it helps you to anticipate the bulb change, reducing the risk of a failure during an intervention.
Adjustment of the light
intensity with a mechanical iris: the colour temperature remains constant, unlike an electrical regulation.
The iris button
reduces the light intensity to 10% only:
•the light cable can stay in the light source without getting hot

•the endoscope can remain out of the trocart with no risk of burning the drape.
100 W Xenon bulb
The good choice for high sensitivity single chip camera.

SOPRO 218 180 Watts Xenon light source

Easy access to the bulb:
•neither specific tool nor training is required, any technician can replace the bulb within 5 minutes once cooled down;

•high quality optical components;

•the Hot Mirror reflects InfraRed rays, reducing the temperature at the focusing point;

•the condensor focusses all the light in your light cable.
The Digital Display
shows the light intensity (0 to 100%) and the age of the bulb: it helps you to anticipate the bulb change, reducing the risk of a failure during an intervention.
Adjustment of the light
intensity with a mechanical iris: the colour temperature remains constant, unlike an electrical regulation.
The iris button
reduces the light intensity to 10% only:
•the light cable can stay in the light source without getting hot

•the endoscope can remain out of the trocart with no risk of burning the drape.
New generation 180 W xenon bulb
High output, reliability. SOPRO 218 gives the best
price/performance ratio

SOPRO 206 Metal Halide light source

The Digital screen on the front panel allows to display:
- the current active lamp;
- the Lamp age: to anticipate the bulb change thus reducing the risk of a failure during an intervention.
- the Brightness: 0 iris closed, 10: full intensity.
Easy access to the bulbs:
neither specific tool nor training are required, any technician can replace a faulty bulb within 5 minutes once cooled off.
To eliminate any risk of failure during a surgery,
a spare halogen 100W bulb is also available.
Adjustment of the light intensity thanks to a mechanical iris : no colour temperature changes.
60w metal halide bulb :
the latest generation in metal halide technology: provides the same light intensity as a classical 180W Xenon and lasts 100% longer.

SOPRO 230 300 Watts Xenon Light Source

Easy access to the bulb:
• neither specific tool nor training is required, any technician can replace the bulb within 5 minutes once cooled down;
• high quality optical components;
• the Hot Mirror reflects InfraRed rays, reducing the temperature at the focusing point;
• the condensor focusses all the light in your light cable.
The Digital Display shows the light intensity (0 to 100%) and the age of the bulb: it helps you to anticipate the bulb change, reducing the risk of a failure during an intervention.
Adjustment of the light intensity with a mechanical iris: the colour temperature remains constant, unlike an electrical regulation.
The iris button reduces the light intensity to 10% only:
the light cable can stay in the light source without getting hot;
the endoscope can remain out of the trocart with no risk of burning the drape.
300 W Xenon bulb suits most of the applications and gives the best price / performance ratio.

SOPRO has been developping and manufacturing medical devices since 1986.

SOPRO 225 250W twin halogen light source

Easy access to the bulbs:
No training required, any technician can replace a faulty bulb within 5 minutes once cooled down.
Easy selection of the lamp, simply by pressing the central button on the front panel.
To suppress the risk of failure during a surgery, the SOPRO 225 has two 250 watts halogen bulbs.
Easy adjustement of the brightness: just turn the corresponding knob on the front panel.
Excellent cooling with low noise.